Traditional acoustical drop ceiling tiles are designed to reduce the echo within a space. They do so by allowing noise to pass through them, from the occupied space below, into the void above the tiles. This means that sound in pipes and ductwork and noise from equipment can also pass through them, disturbing people in rooms below.
Whether the undesirable sound
is conversation or noise from pipes, ducts and
equipment, Sound Seal’s Noise Barrier Ceiling
Tile Covers make a difference.
The most effective ways to minimize noise from
HV AC units is to reduce the noise either at its
source or along the path. Noise Barrier Ceiling
Tile Covers effectively block sound transmission
through ceiling tile systems.
They combine a limp barrier layer with an absorber / decoupler to achieve much greater isolation than would be achieved with a layer of insulation alone.
NBCTC Model 1-1
NBCTC Model 1-1 features a flexible 1 lb/sq ft loaded vinyl noise barrier sandwiched between two layers of 1” fiberglass for maximum acoustical performance with Class A flammability ratings for use in any building.
NBCTC Model 10LAG-1
NBCTC Model 10LAG-1 combines a flexible 1 lb/sq ft foil faced loaded vinyl noise barrier with a 1” fiberglass decoupler to enhance its noise reduction properties..
NBCT Light Fixture Covers
NBCT Light Fixture Covers are oversized and provided with corner slits to conform to the shape of the convex light fixtures.
Noise Barrier Ceiling Cover Brochure